Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - plongeur66

Pages: [1] 2 3 4 5 ... 25
1
DIY/Fix-It Up/Repair / Kindle Demos
« on: June 17, 2017, 11:28:51 AM »
Found a Kindle Paperwhite demo at one of my stops. Supposedly some are easy to return to full functionality by typing ";resell" (without the quotes) in the search box. No dice for my unit, still a demo.
Then I found this info online:
http://www.xodustech.com/guides/kindle-paperwhite-demo-unlock
Ordered a USB-to-serial adapter from China for a buck, hopefully gets here within a month. This should be any easy project, takes me back to my phone flashing and unlocking days about 15 years ago. People apparently have no problems registering the serial numbers on the river. They apparently expect refurbed/recycled units to come back online and don't blacklist them unless reported stolen. Demos selling for ~$25 on feebay, some people are buying in bulk to restore and resell.

2
Dumpster Diving Tips / Employee Stashes
« on: June 14, 2017, 11:05:00 PM »
I've seen a spike in stuff being "set aside" in recent months.
A complete working CPAP machine and Win 7 laptop in the Badwill bin. Also a bunch of small audio and video adapters with the cords tied together so somebody could just grab the whole "octopus" at once. Sitting front and center in the bin. Remainder of bin contents were all actual garbage.
Over $1000 of ink and 10 128GB flash drives neatly slid into a large carry out bag just behind the side door of the office store bin. Everything sealed, ink expires 2019, no destroy tags on anything. Once again, nothing good anywhere else in the bin.
Was approaching a Harbr Fret stop when I heard squealing sounds and saw a flashing light coming from the bushes. Found a 17 amp-hour jump starter with return tag that somebody had put in a brown paper bag and stashed for later. I would have never noticed it if the battery hadn't run low giving rise to the noise and light show.
I'm sure these people weren't happy when they found out that their toys had walked away...

3
The Dung Heap / Re: Beware Feebay Bullshiite
« on: June 11, 2017, 03:03:31 PM »
Make sure you make a separate complaint against him regarding the dual IDs. Extremely rare for feebay to not side with the buyer, but I've heard that the big sellers have a better chance.

4
The Dung Heap / Re: Beware Feebay Bullshiite
« on: June 10, 2017, 03:53:46 PM »
Just had a buffoon ask me if my $15 dummy tablet had stable WIFI, I'm glad he asked before buying.

6
Trash Talk / Re: Rich & Desperate?
« on: June 06, 2017, 10:47:12 PM »
Went back there, smelled coffee halfway across the parking lot. Some employee spent probably most of his shift individually poking holes into 1000+ K-cups, grounds were scattered all over the bin. A day diver must have gotten in the manager's face and told him to perform an anatomically impossible sex act on himself. Another stop ruined, and so it goes....
Severely mutilated Bose headphones found at the next stop on the line, I might still be able to sell the earcups/speakers.
They are onto us...
Not a single shiny thing in sight... >:(

7
The Dung Heap / Re: The Climate Change Myth Thread 2.0
« on: June 06, 2017, 11:09:38 AM »

Just think of the damage terrorists could do if they got ahold of some of these "bombs":
https://www.good.is/articles/backpack-collects-cow-farts

8
If within a foot of a 15 watt tube, half an hour should be plenty. Larger items should be repositioned so all areas spend time near the tube. Get both sides of darker-colored items by flipping them over. Best to run all day if you're using a ceiling-mounted fixture. I control a mold problem in my bedroom by running a dehumidifier, extra fan, and 15 watt UVC light generally twice a week for 5-6 hours.

9
You've probably seen the battery-powered sanitizing wands around. They are very low power, cost upwards of $50, and will only work for a few minutes at a time. You can get germicidal bulbs that will fit in linear fluorescent fixtures like under-cabinet lights and portable blacklight fixtures. Putting 4-foot germicidal bulbs into a shop light gives you a serious decontamination chamber. Leave the room immediately when powering up these lights, they can mess up your hide and eyes.
https://en.wikipedia.org/wiki/Ultraviolet_germicidal_irradiation
I use these lights when I pick up stuff like towels and bedding. Be aware that only organisms exposed directly to the light will be killed. Thin or light colored blankets will be effectively sanitized, but something lurking inside of a couch or thick comforter would not be affected.
 

10
Trash Talk / Re: Getting prepared for the event
« on: May 20, 2017, 03:50:37 AM »
Pork is never your friend, unless you've already eaten it and sent it on it's way through your digestive tract.  :D

 

11
Trash Talk / Is It Real?
« on: May 13, 2017, 07:27:56 AM »
Found in a Gameshtupf bin, very good condition:


12
Trash Talk / Re: Rich & Desperate?
« on: May 09, 2017, 12:05:10 PM »
Same stop yesterday morning. First a Ryder truck backs up to the dumpster. Guy raises the back door of the truck, then starts browsing the top of the bin. He left empty-handed, not sure why he was so confident that he'd be getting something. Then a diesel volvo pulls up - it was louder than the truck. He gets nothing. I got nothing there myself, I rooted through the bin before either of them showed up.

13
Trash Talk / Rich & Desperate?
« on: April 24, 2017, 11:43:32 PM »
Was approaching one of my sites last week, spotted a silver Infiniti parked where I wasn't expecting a car to be. After confirming nobody was in it, I continue approaching the bin....until I see a flashlight beam wandering around. I head into some woods alongside to watch/wait. Guy puts a small item in his trunk, I couldn't see what it was. Just as he leaves a late model white Cadillac comes around the corner. Guy in a suit gets out and also scopes out the bin with a flashlight. No dice for him...or me. As I'm walking back to my car a black Porsche comes gliding around the corner with headlights off. I bust out laughing. 4 people hit that bin in a 5 minute period, that's probably busier than the store's checkout line on Black Friday. ;D The repo man can't be far behind if those guys are relying on dumpsters to keep up on their payments. Fortunately my garbage scow is paid for.

14
DIY/Fix-It Up/Repair / Re: Tablet Screens
« on: April 14, 2017, 01:32:02 PM »
Paperclips finds. I will sell "for parts" stuff as well as TV boards, etc. if there is a demand for them. The 10-inch tablet was a $169 Black Friday 2016 deal, somebody didn't waste any time smashing it. I will likely keep it and sell a couple of netbooks I've kept around. The Z8300 chip in this tablet is supposedly capable of playing HD H265 video at 60FPS, the netbooks can barely handle SD H264 at 30 fps.

15
DIY/Fix-It Up/Repair / Tablet Screens
« on: April 13, 2017, 05:36:25 AM »
So I dived some tablets including one of these puppies with a busted touchscreen:

https://shopnuvision.com/collections/windows-tablet/products/tm101w625l-10-1-2-in-1-tablet-pc-with-windows-1
Researched online to find out you need at least 200F degrees to soften the glue holding the LCD and touchscreen together. 230 degrees will burn the LCD. A hair dryer won't go beyond 150 degrees, so is useless. A heat gun gets plenty hot enough, but there's major risk of burning the LCD and/or nearby plastic parts.
I decided to put the tablet in my gas oven, used this dived digital smokehouse thermometer to make sure things didn't overheat:

I removed the motherboard and battery, put the frame in the oven for 5 minutes between 190 and 200 degrees.  Was able to lift up the glass about an eighth of an inch, then slowly worked sideways a couple of inches with a small screwdriver blade. I had cut a plastic gift card into 1/4 inch wide strips, I slid these in between the glass and frame to keep the glass from gluing itself down again. Slow going, I put the frame back in the oven for 5 minutes every time I'd loosened up another couple of inches. It eventually comes apart with no apparent damage to the LCD or other tablet parts. Speakers fell out due to their adhesive softening, but went back in easily.
$23 digitizer on order from China, should be here by the end of next month.
I did put a couple extra cracks in the already broken digitizer, no biggie. A broken digitizer with good LCD is the most likely scenario you'll encounter. The trickiest scenario is if you try to separate a good digitizer from a bad LCD without breaking the former. I would likely have heated up to 220 degrees in this case to get the glue really soft.
Here are some other dived goodies:
A working 8 inch tablet that I'm using as an audio player for my talk radio shows, Zagg keyboard dived last year:

I had to reinstall the drivers for this via USB. I went to use the camera feature. Rear camera worked fine. I switched to the front camera, causing it to bluescreen, reboot and delete all it's drivers again. Guess I won't be using the front camera.
Keyboard for another 10 inch tablet:

Also a no-name 7 inch tablet with both motherboard and screen smashed. Battery pack consisted of 2 2500MAH pouch batteries connected in parallel. I harvested them and put them into a $4 large USB battery bank case that was intended for 6 laptop cells:

Battery chemistry/charging voltage is identical between the pouch batteries and cylindrical laptop cells.



Pages: [1] 2 3 4 5 ... 25